Digital fuel level sensors model GL-TV34 have universal characteristics.
The sensors have identical connector and the basic parameters for traffic information with the famous manufacturer of the fuel level sensors Omnicomm. They can completely replace the production of Omnicomm without any reconfiguration of GPS Trackers.
To configure the sensor you can use GL-TVin Device setup sensor or you can use OMNICOMM AT100.
GL-TV34 sensors are fully compatible with all types of the monitoring equipment that has a digital interface.
Our company offers a warranty period of 2 years from the production date.
Specifications of GL-TV34:
- Measuring Liquids: light oil products (diesel, gasoline, etc.)
- Operating principle: capacitive sensing
- Power supply: from 7 to 50 V with protection against temporary overvoltage
- Power consumption: no more than 0.5 W
- Operating temperature range: from -50 to +80 ° C
- Reduced measurement range: 1..4095
- Interworking interface with the terminal: RS485
- Interface protocol with the terminal: Omnicomm (connection of additional protocols is possible)
- Data transfer rate: 19200 bit / s.
- The relative error in measuring of the level in the whole temperature range: no more than 1%
- Sensor sensitivity: better than 0.5 mm
- Adaptive mode of averaging readings
- Ingress Protection: IP67
- Body Material: Aluminum Alloy
- The length of the measuring part: 1..300 cm
- The operation mode according to GOST R 52230-2004: continuous running duty
- Power supply, the sensor body and transfer interfaces are galvanically isolated
- The size of the sensor head protruding above the fuel storage container: diameter 80 mm, height 25 mm.
- Fastener can be made by self-sealing screws or by M5 screws, there are also five fixation holes, the diameter of the hole for sensor measuring part in the fuel tank is 34 mm.
Delivery set:
- GL-TV34 Fuel Level Sensor
- Interface Cable in corrugated tube, the length 7 m
- Gasolineproof seal, screws, centering plastic switch.